- (732) 248-4455
- jporr@bruns-pak.com
- jdigangi@bruns-pak.com
- Mon - Fri: 8:00 - 5:00
Data Center Solutions
Data Center Facility Infrastructure
Service Included
Designing. Engineering. Constructing. Commissioning.
Data Center “Hybrid” Solutions
Our “hybrid” solutions consist of shared IT operations and equipment for storing, processing, and disseminating data and applications.
We take a fully integrated approach to the creation of technical facilities that gives you a single source of responsibility from start to finish. This unique methodology eliminates traditional construction delays, enhances responsiveness to design modifications, and guarantees necessary technical expertise – throughout the project. We go through 3 phases:
"Most impressive was BRUNS-PAK’s ability to work with our internal staff to design and engineer a “custom” solution. The results are outstanding!!! I would strongly recommend BRUNS-PAK."
PHASE I - Consulting
Thorough and comprehensive, resulting in a plan that provides options and technical alternatives to meet your timeframes, philosophies, short-term and long-term strategic objectives, as well as budgetary guidelines.
Consulting
Data Center “Hybrid” Assessments |
Site Evaluation, Selection, & Planning |
Reliability Studies |
Single Point of Failure Analysis |
Data Center Facility Audits |
DR Facility Requirement Studies |
LEED Certification Analysis |
Colo/Cloud Analysis |
Container/Pod Studies |
Network Analysis/Wi-Fi Analysis |
Total Cost of Ownership Studies |
Virtualization Integration |
Relocation Evaluations |
Merger/Consolidation Studies |
Space Planning |
Computer Equipment Planning |
Requirements Analysis |
Preliminary Program Studies |
Thermal Air Flow Analysis |
Energy Efficiency Audits |
IT Business Impact Analysis |
Site Assessment Evaluations |
Facility Evaluations |
IT/Data Center Strategic Planning |
Cloud Impact | Colo Impact Planning | Cybersecurity |
Edge Compute Analysis |
HPC/Analysis AI | Short Circuit Coordination and Arc Flash Studies | Carbon Footprint | Green Initiatives
PHASE II - Design/Engineering/Planning
Drawings and specifications that reflect creative, state-of-the-art design solutions.
Design/Engineering/Planning
Architectural Design |
Site/Civil Engineering |
Communications Engineering |
Electrical Engineering |
Mechanical/HVAC Engineering |
Structural Engineering |
BMS/DCIM Modeling |
Fire Protection Engineering |
Raised Floor Engineering |
Security Design |
Voice and Data Integration |
Design for Sustainability |
3-D Revit Modeling |
Network |
Cloud Requirements |
Design/Cybersecurity |
Colo Requirements |
Complete Migration Planning |
Wireless |
Low Voltage |
AV |
Mass Notification Systems | Disaster Recovery Planning
PHASE III - Construction/Commissioning/Deployment
A fully integrated approach to the creation of technical facilities that gives you a single source of responsibility from start to finish. This unique methodology eliminates traditional construction delays, enhances responsiveness to design modifications, and guarantees necessary technical expertise – throughout the project.
Construction/Commissioning/Deployment
Construction Management |
Construction Administration |
General Contracting |
Project Management |
Project Planning & Scheduling |
Turnkey Planning, Implementation |
Commissioning |
BIM Modeling |
Financing |
Cloud Deployment |
Application/Hardware Migration |
Colo Deployment |
Electrical Wire & Cable |
Network Construction |
Electronic Wire & Cable |
Voice & Data Cable
PHASE I - Consulting
Thorough and comprehensive, resulting in a plan that provides options and technical alternatives to meet your timeframes, philosophies, short-term and long-term strategic objectives, as well as budgetary guidelines.
PHASE I - Consulting
Thorough and comprehensive, resulting in a plan that provides options and technical alternatives to meet your timeframes, philosophies, short-term and long-term strategic objectives, as well as budgetary guidelines.
PHASE II - Design/Engineering/Planning
Drawings and specifications that reflect creative, state-of-the-art design solutions.
PHASE II - Design / Engineering / Planning
Drawings and specifications that reflect creative, state-of-the-art design solutions.
PHASE III - Construction / Commissioning / Deployment
A fully integrated approach to the creation of technical facilities that gives you a single source of responsibility from start to finish.
PHASE III - Construction / Commissioning / Deployment
A fully integrated approach to the creation of technical facilities that gives you a single source of responsibility from start to finish.
Why a Data Center?
Your business needs to store and manage the most critical resources that are vital to the operation including data storage, computing, and networking. The reliability, efficiency, security and constant evolution of data centers are vital to daily business operations.
Computing
The memory and processing power to run the applications, generally provided by high-end servers.
Storage
Important enterprise data is generally housed in a data center, on media ranging from tape to solid-state drives, with multiple backups
Networking
Interconnections between data center components and to the outside world, including routers, switches, application-delivery controllers, and more.
BRUNS-PAK Has The Solution For Your Business
Get in touch with us to learn about how our skilled team of professionals will help you achieve your mission critical goals.